Allow us to introduce our first squonker mod, the Spruzza! The Spruzza features a small, compact design that is powered by 1x 18650 sized battery but don't let it's petite stature fool you. The Spruzza features new technology we have developed called the SSS (Smart Siphon System) which will revolutionize the squonk style platform. The SSS system utilizes a pump located on the body of the mod that siphons juice through the 510 pin and pumps juice into your squonk ready RDA. The internal juice chamber of the Spruzza hold's an impressive of juice.
The Spruzza is powered by a GX-80-HUT chip which allows for wattage (power) mode, temperature control modes, TFR, TCR, and our new "Curve" mode. Curve allows the user to imitate the abilities of temperature control mode by allowing the user to set 5 different wattage over time presets for up to 10 seconds. For example if you were running a Clapton style coil, which typically require a little ramping to get to a firing sweet spot, you can set the device to fire at 80 watts for .2 seconds and then 65 watts for 5 seconds. This will quickly ramp the coils and lower the wattage after the ramp to provide a smooth hit.
The Spruzza has two removable doors. One door opens to allow access to the SSS system for filling and opening the other door allows you to easily access the battery. The SSS system and the battery tray are on opposite sides of the mod so that is the SSS is overfilled and spills, it will not leak into the internals of the mod.
Coupled with the Spruzza is the Fonte RDA. The Fonte is a 24mm RDA that comes squonk ready. The Fonte is constructed with high quality SS316 and features a heat sink on the top of the cap. The cap is topped with a Delrin wide bore drip tip to maximize intake. The Fonte airflow is easily adjustable by simply spinning the sleeve of the cap. The airflow inlets on the sides of the cap are arched downwards on the ends of the inlets which channel airflow to the bottom of the deck. This will create a bottom airflow effect with a side airflow cap!
Requires 1x 18650 sized battery (not included)
Touch screen type: Capacitive screen (Requires the electrical properties of the human body to detect when and where the display is touched)
Wattage range (Power mode): 5W - 80W
Wattage range (TC modes): 5W - 60W
TC acceptable wire types: Ni200 Nickel, Ti Titanium, SS317 Stainless steel, SS316 Stainless steel, and SS304 Stainless steel
Temperature control range:
What's in the box:
1 x Mod
1 x RDA